220V 852D Hot air Desoldering Station Digital Thermostat Hot Air Blower. Can't directly use in 110V power.
852D++ is optimized from the circuit board performance, structure and package based on 852D+, it can reduce the posibility of damages caused during the transportation with more stable and reliable electronic performace, circuit structure and package. 2, Precise Digital Display Of The Wind Gun And Soldering Iron Temperature, Power, Rapid Heating, Not Affected By The Air Volume, The True Realization Of Lead-Free Welding. The Magic Temperature Compensation Speed Further Strengthens The Temperature Stability, The Temperature Steady State Error Is Small, The Temperature Compensation Is Strange Quick, Can Adapt To Each Kind Of Harsh Environment. 100 cm (including the handle).
2, for heat shrinkage, drying, paint removal, removal, thawing, preheating, bull glue welding etc. Working status indicator light of wind gun. The lamp is often bright, which means that the air gun is heating. The lamp "shining" means that the air gun is working at constant temperature.
The light is not bright, which means that the air gun is in a state of no heating and stopping. The lamp "bright" means that the blower is in the working state of the blower. The light is not bright, which means that the fan is in the state of no blow off. The "light" of the lamp indicates that the soldering iron is heated.The "flash" of the lamp indicates that the soldering iron is in a constant temperature state. The light is not bright, indicating that the soldering iron is in a state of no heating and stopping. 1, the desoldering station is put, connect the air gun handle, the handle must be put in the handle frame, otherwise the air gun will not work (safety protection function, effectively prevent the unique air gun fire in other places or other accidents aside in unknown circumstances). 2, connect the power supply, the device needs the wind Tsui (as far as possible the use of large diameter nozzle or do not use the mouth). 3, open the power switch of the wind gun, the display window shows "---", at this time the wind gun standby state.
4, after work, must be placed in the handle handle frame, automatically cut off the heating current at the air gun, into the cold air cooling heating mode, when the temperature is below 100 DEG C desoldering station display "---" said the machine will enter the standby state, when the heating temperature lower than 70 DEG C when the machine state (when there is intermittent breeze away, said heating body temperature is higher than 70 DEG C, only temperature lower than 70 DEG C when the true fan will stop working). 5, long-term operation, must turn off the power switch. 1, the iron handle connected, the handle on the iron stand in. 2, open the iron power switch, according to the set temperature in the heating process of iron, iron light lit, when flashing lights of the soldering temperature into the state, then it can work normally. Normally, you should receive item within 2-4 weeks.
We are a professional trading company specializing in video games, car accessories, spy equipments and other electronic products. We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders.
In order to provide you the best service????? If YOU are not satisfied, please let us know so we can make it right.
In case of DOA, Please notice us within 3 days and return the case within 7 days after receiving the items. (The date on Post Mark is for standard).
Air Pressure Gun Parts: Voltage: AC220V / 50 HZ Heating Elements: Skeleton Type Ceramic Heater Display Form: LED digital resolution (1) Pump Flow Type: Brushless Fan Soft Wind Noise: less than 45db Power Consumption: 700 w Temperature Range: 100 to 500 Temperature Stability:±1 Gas Flow Rate: 120 Liters/Min. Handle Length: 100cm (including the handle) Soldering Iron Parts Voltage: AC220V / 50 hz Power Consumption: 50 w Temperature Range: 200 to 480 Temperature Stability: plus or minus 2 (light) Output Voltage: AC24V Heating Elements: A1322 ceramic heater Display Form: LED digital resolution (1) Handle Length: 100 cm (including the handle) Notice: This product has only 220V type on sale, cant directly use in 110V power.
The item "220V 852D++ Hot air Blower & Solder Soldering Iron Rework Station 2 IN 1" is in sale since Saturday, November 4, 2017. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Soldering/Desoldering Equipment & Accessories\Soldering Guns & Irons".The seller is "lijuan2047" and is located in Shenzhen. This item can be shipped worldwide.